Ford Fiesta Mk7 2008 on 4x108 30mm ALLOY Hubcentric Wheel Spacers 1 Pair UK MADE Boost Gauge Standard Map with Airtec I/C

Standard Map with Airtec I/C Run 1 - Intake temperature 115 degree's (charge air temp going into intercooler) & 13 degree's outlet temperature (charge air temp coming out of intercooler)Standard Map with Airtec I/C Run 2- Intake temperature 118 degree's (charge air temp going into intercooler) & 18 degree's outlet temperature (charge air temp coming out of intercooler)Standard Map with Airtec I/C Run 3 - Intake temperature 119 degree's (charge air temp going into intercooler) & 18 degree's outlet temperature (charge air temp coming out of intercooler)Over the 3 test runs the Airtec intercooler cooled down the charged Air Temperature by an average of 100 degree's

Please note alternative silicone colour options of black or red available

2 and 3 intercoolers back-to-back at Brands Hatch circuit to see how the levels compare with each other

2 m connection cable included

Ford Fiesta Mk7 2008 on 4x108 30mm ALLOY Hubcentric Wheel Spacers 1 Pair UK MADE Boost Gauge Standard Map with Airtec I/C1 PAIR 30mm Hubcentric Wheel Spacers 4x108 with 63. 3 centre bore 10. 9 STEEL GRADE STUDS Designed to fit Ford vehicles with M12x1. 5 studs Gives you 30mm spacing per side Please note you may need to cut your factory studs as the normal stud length is approx. 24mm Most of the time you may well find that stud length may well sit inside the rear of a lot of wheel designs As many wheels have a hollow or concave rear to the hub area Please check this when